Skip to content
Address LightingLighting culture & awareness

Home / Knowledge library / Comparison

Comparison

48V magnetic track light vs traditional 220V

Reviewed under Eng. Abdullah Al Balushi

“Why is everyone switching to magnetic track lights and leaving the old ones? The secret is the voltage!”

The problem

Old track lights are dangerous to touch and look bulky.

Technical explanation

Magnetic track runs on 48V, is very safe to touch, and lets you remove, fit and reposition spots by hand without an electrician.

The result

Complete freedom to change your lighting layout any time, yourself and in total safety.

Related to

Similar entries

ComparisonFixed in-ground light vs. Spike light

“Your garden plants grow... but their lighting never changes?”

The problem
Fixed in-ground lighting can’t keep up with trees as they grow and change shape
Technical explanation
A Spike light is pushed into the soil, so you can move it, change its angle and set it further back as the tree grows, ensuring perfect coverage at all times
The result
A flexible, ever-renewing garden at minimal cost

Page for this entry

Common mistakeThe wrong distance for a 24V driver

“You installed a great 24V strip, but the light fades towards the end? The mistake is the driver!”

The problem
Placing the driver (transformer) too far from the cove strip, causing voltage drop and weaker light.
Technical explanation
The driver should be close to the strip (no more than 3 m away), and if the run is longer than 5 m, it should be split into separate circuits.
The result
Cove lighting with even brightness from one end of the room to the other, with no fading.

Page for this entry

Common mistakeMounting the track light too close to the wall

“Installed an expensive magnetic track light, but it looks wrong? Because you forgot about the wall!”

The problem
Installing the magnetic track too close to the wall prevents light from being directed left and right and spoils the look of the adjustable spots.
Technical explanation
The track should be far enough from the wall to allow the Spotlights to be aimed freely at artwork or furniture without hitting the wall.
The result
Real flexibility to change the décor later and full use of the magnetic system's advantages.

Page for this entry

Common mistakeFixed spotlights above furniture that moves

“Every time you move the sofa, the spotlight ends up shining on empty floor?”

The problem
Using fixed recessed fittings in living rooms where the furniture layout changes often.
Technical explanation
The solution is to use Zoomable spotlights, which let you widen or narrow the beam angle (from 15° to 36°) by hand without replacing the fitting, or a magnetic track system.
The result
Complete freedom for the lady of the house to change the décor and aim the light at new furniture in seconds.

Page for this entry

Common mistakeChoking the Track light

“Installed a magnetic Track light right against the wall? You’ve killed it!”

The problem
Installing the Track too close to the wall prevents the fixtures from being adjusted
Technical explanation
The Track must be set at a distance that lets the directional Spots rotate left and right freely to hit artwork or furniture
The result
Maximum flexibility to change your décor whenever you like

Page for this entry

Common mistakeLeaving fixtures dirty

“Your lighting suddenly got weaker? Don’t change the light, just clean it!”

The problem
Dust building up on polished reflectors reduces their efficiency by up to 30%
Technical explanation
Aluminium reflectors are affected by fingerprints and dust. Regular maintenance and wiping with a soft cloth restores most of their efficiency
The result
Longer fixture life and no money wasted on needless replacements

Page for this entry

Common mistakeMixing magnetic track light brands

“Bought a magnetic track from one shop and the lights from another? Get ready for trouble!”

The problem
Magnetic track has no unified standard, and differing sizes between manufacturers prevent installation and cause short circuits.
Technical explanation
The Track, the fittings (Spots) and the drivers must be bought from the same supplier to guarantee matching power supply and dimensions.
The result
Protects the owner from wasting money on incompatible products.

Page for this entry

ComparisonSlim track light vs wide track

“Want lighting that blends into the gypsum as if it isn't there? The secret is the size of the track light!”

The problem
Track lighting rails stand out and spoil the décor of majlis rooms and rooms with low ceilings.
Technical explanation
Slim fittings (Slim Magnetic Tracks) are visually quieter and blend fully into the gypsum compared with traditional wide systems.
The result
A clean, modern ceiling that preserves the room's height.

Page for this entry

Guide values; the final decision rests with a qualified engineer under the applicable code.

MistakesFree consultation