Home / Knowledge library / Comparison
Comparison
Electronic Ballast vs. magnetic
“Your old lights hum and make an annoying noise? This is the reason!”
The problem
Old ballasts cause heat, noise and high electricity consumption.
Technical explanation
Modern fittings with electronic ballasts save 20% of electricity, are Flicker-free and extend lamp life.
The result
Complete quiet and healthy eyes.
Related to
Similar entries
Common mistakeFalse savings on the lighting budget
“Want to save on your lighting budget? Don't buy cheap, use the “hybrid system”!”
- The problem
- Buying cheap products for the whole villa to save money, which leads to burnt-out fittings and double the maintenance cost.
- Technical explanation
- The hybrid system means combining very high-spec fittings (for the majlis, living rooms and facade) with mid-range fittings (for service rooms and storerooms).
- The result
- Cutting costs by up to 40% while keeping 100% of the luxury in the areas guests see.
Spec explainedProtecting outdoor lighting (IP65)
“Why do your courtyard lights fail after every rain or wash-down? Check for this spec!”
- The problem
- Outdoor lighting and shower-area fittings getting damaged by water and humidity.
- Technical explanation
- An IP65 rating ensures the fitting is fully sealed against water jets and dust.
- The result
- Lighting that lasts in the toughest Gulf climate conditions, and savings on maintenance.
ComparisonIP20 indoor light vs IP44 for bathrooms
“Installed a standard spotlight in the bathroom ceiling? Watch out for the humidity!”
- The problem
- Lamps failing and frames rusting quickly because of steam.
- Technical explanation
- Directly above the shower area, use sealed fittings rated IP44 at minimum, or IP65, to stop steam condensing inside the electronic chip.
- The result
- Less maintenance and lasting performance for years in the humid bathroom environment.
ComparisonIP20 vs. IP65 fixtures in the bathroom
“Why do your bathroom lights keep flickering and failing? You’re choosing the wrong protection!”
- The problem
- Electronics damaged by steam
- Technical explanation
- IP20 is meant for dry rooms. Directly above the shower you must use IP65, which is fully sealed against water spray and steam
- The result
- Safety for your family from short circuits, and savings on replacing burnt-out lights
ComparisonFixed in-ground light vs. Spike light
“Your garden plants grow... but their lighting never changes?”
- The problem
- Fixed in-ground lighting can’t keep up with trees as they grow and change shape
- Technical explanation
- A Spike light is pushed into the soil, so you can move it, change its angle and set it further back as the tree grows, ensuring perfect coverage at all times
- The result
- A flexible, ever-renewing garden at minimal cost
Spec explainedGarden protection (IP67)
“You wash down your courtyard and the in-ground light shorts out? That's a deadly mistake!”
- Technical explanation
- Recessed in-ground lights need IP67 protection because they are temporarily submerged in water during rain or washing.
- The result
- Total safety for children and a long life for your courtyard fittings.
Spec explainedCooling outdoor lighting
“Will your façade lights survive the summer? If the heatsink is weak, they'll melt!”
- Technical explanation
- Outdoor fittings need solid, large aluminium heatsinks to dissipate LED heat in Gulf conditions that reach 50 degrees.
- The result
- A lit façade all year round with no sudden burnouts.
Common mistakeThe grid-layout trap
“A spotlight every 2 metres? That old rule will cost you on your bill and leave your villa ceiling looking cluttered!”
- The problem
- Filling the ceiling with a huge number of evenly spaced spots (a grid layout), which creates visual noise and strains the eyes.
- Technical explanation
- Smart lighting design places light according to the furniture, artwork and walls, not by random even spacing.
- The result
- Lower installation, electricity and maintenance costs, with a cleaner, more attractive ceiling. (Invite viewers to send their floor plan on WhatsApp for a smart lighting layout.)
Guide values; the final decision rests with a qualified engineer under the applicable code.