Home / Knowledge library / Spec explained
Spec explained
Outdoor in-ground lighting IP
“Washing your courtyard and worried about electrical shorts?”
Technical explanation
In-ground lights come with an IP67 rating that withstands temporary submersion in water.
The result
Total safety for children and a long life for your garden fittings.
Related to
Similar entries
Common mistakeFacade lighting and windows
“You installed powerful floodlights on your villa facade, but the light hits the windows and keeps you up at night?”
- The problem
- Aiming facade lights at a wide, random angle lets light spill into the bedrooms.
- Technical explanation
- Exterior lighting needs a very narrow beam and precise aiming (Narrow beam) so it lights only the architectural details without causing disturbance.
- The result
- An eye-catching, elegant facade, with complete calm and comfortable darkness inside the bedrooms.
Common mistakeFalse savings on the lighting budget
“Want to save on your lighting budget? Don't buy cheap, use the “hybrid system”!”
- The problem
- Buying cheap products for the whole villa to save money, which leads to burnt-out fittings and double the maintenance cost.
- Technical explanation
- The hybrid system means combining very high-spec fittings (for the majlis, living rooms and facade) with mid-range fittings (for service rooms and storerooms).
- The result
- Cutting costs by up to 40% while keeping 100% of the luxury in the areas guests see.
Common mistakeThe four bathroom Zones
“Electrically, a bathroom isn’t one area... it’s 4 zones! Getting this wrong causes short circuits.”
- The problem
- Installing non-sealed (IP20) fixtures in direct shower areas
- Technical explanation
- In engineering terms the bathroom is divided into 4 zones (Zone 0 for the tub, Zone 1 above the shower which needs IP44/IP65, and Zone 3 for dry areas)
- The result
- Protecting your family from electric shock, and choosing fixtures that last a long time without rusting
Common mistakeBuying IP20 lights for the bathroom
“Putting an ordinary spotlight in the shower ceiling and wondering why it gives shocks?”
- The problem
- Using non-sealed fittings in Zone 1, which is exposed to steam and water.
- Technical explanation
- The area directly above the shower needs fittings rated IP44 or IP65 to withstand steam.
- The result
- Protects your family from electric shock.
Spec explainedProtecting outdoor lighting (IP65)
“Why do your courtyard lights fail after every rain or wash-down? Check for this spec!”
- The problem
- Outdoor lighting and shower-area fittings getting damaged by water and humidity.
- Technical explanation
- An IP65 rating ensures the fitting is fully sealed against water jets and dust.
- The result
- Lighting that lasts in the toughest Gulf climate conditions, and savings on maintenance.
ComparisonIP20 indoor light vs IP44 for bathrooms
“Installed a standard spotlight in the bathroom ceiling? Watch out for the humidity!”
- The problem
- Lamps failing and frames rusting quickly because of steam.
- Technical explanation
- Directly above the shower area, use sealed fittings rated IP44 at minimum, or IP65, to stop steam condensing inside the electronic chip.
- The result
- Less maintenance and lasting performance for years in the humid bathroom environment.
ComparisonIP65 vs IP67 lights
“Not every outdoor light can go into your garden floor!”
- The problem
- In-ground lights failing because of pooled rain or irrigation water.
- Technical explanation
- IP65 protects against water jets and is excellent for facades. But lights set into the ground need IP67 (protection against temporary immersion in water) to withstand irrigation water and rain.
- The result
- Fittings that last for years in the garden soil without burning out.
Spec explainedBathroom protection (IP44)
“Does your shower light keep rusting? Careful, this is an electrical hazard!”
- The problem
- Installing unsealed fittings in areas where steam rises.
- Technical explanation
- The area directly above the shower needs fittings rated IP44 at minimum, or IP65, to stop steam condensing inside the electrical circuit.
- The result
- Protecting your family from electrical short circuits and keeping the décor clean and rust-free for longer.
Guide values; the final decision rests with a qualified engineer under the applicable code.