Home / Knowledge library / Spec explained
Spec explained
Aluminium channel sizes (Aluminum Channels)
“Installing cove LED without an aluminium channel? You're shortening its life and ruining its look!”
The problem
Sticking the cove strip directly onto wood or gypsum causes it to overheat, peel off and fall after a while.
Technical explanation
Purpose-made aluminium channels (Profile) act as a Heatsink that keeps the chip cool and extends its life, plus an acrylic diffuser that evens out the line of light.
The result
An investment that lasts for years, with no need to re-fix fallen strips every few months.
Related to
Similar entries
Common mistakeDotted light (Dots) on shelves
“You made luxurious marble shelves, and the strip's reflection shows up as dots? There goes the luxury!”
- The problem
- Installing a standard LED strip above glossy surfaces (marble or mirrors), which reflects the LED dots and looks cheap.
- Technical explanation
- Glossy surfaces need either a dot-free strip (COB LED) or an aluminium profile with a Diffuser that hides the dots completely.
- The result
- A smooth, continuous line of light that feels refined and luxurious.
Common mistakeFalse savings on the lighting budget
“Want to save on your lighting budget? Don't buy cheap, use the “hybrid system”!”
- The problem
- Buying cheap products for the whole villa to save money, which leads to burnt-out fittings and double the maintenance cost.
- Technical explanation
- The hybrid system means combining very high-spec fittings (for the majlis, living rooms and facade) with mid-range fittings (for service rooms and storerooms).
- The result
- Cutting costs by up to 40% while keeping 100% of the luxury in the areas guests see.
Common mistakeLighting windows and mirrors
“Lighting your mirrors and windows to make your home look luxurious? You're blinding yourself!”
- The problem
- Aiming lights directly at glass and mirrors bounces the light back as very uncomfortable glare.
- Technical explanation
- Glass doesn't reflect light softly like painted walls do, so lighting should be from the side or hidden behind the mirror (Backlit) to avoid discomfort.
- The result
- Hotel-style bathrooms and corridors, without visual discomfort.
Common mistakeLighting trees the wrong way
“Garden looks gloomy at night? The secret isn’t the trees, it’s the direction of the light!”
- The problem
- Using bright floodlights that hit the trees from above
- Technical explanation
- High-end tree lighting (as in luxury Dubai projects) relies on concealed lighting from below (Up-lighting) to cast dramatic shadows on the walls
- The result
- A home garden that looks like a luxury resort
Spec explainedProtecting outdoor lighting (IP65)
“Why do your courtyard lights fail after every rain or wash-down? Check for this spec!”
- The problem
- Outdoor lighting and shower-area fittings getting damaged by water and humidity.
- Technical explanation
- An IP65 rating ensures the fitting is fully sealed against water jets and dust.
- The result
- Lighting that lasts in the toughest Gulf climate conditions, and savings on maintenance.
ComparisonIP20 indoor light vs IP44 for bathrooms
“Installed a standard spotlight in the bathroom ceiling? Watch out for the humidity!”
- The problem
- Lamps failing and frames rusting quickly because of steam.
- Technical explanation
- Directly above the shower area, use sealed fittings rated IP44 at minimum, or IP65, to stop steam condensing inside the electronic chip.
- The result
- Less maintenance and lasting performance for years in the humid bathroom environment.
ComparisonIP20 vs. IP65 fixtures in the bathroom
“Why do your bathroom lights keep flickering and failing? You’re choosing the wrong protection!”
- The problem
- Electronics damaged by steam
- Technical explanation
- IP20 is meant for dry rooms. Directly above the shower you must use IP65, which is fully sealed against water spray and steam
- The result
- Safety for your family from short circuits, and savings on replacing burnt-out lights
Spec explainedGarden protection (IP67)
“You wash down your courtyard and the in-ground light shorts out? That's a deadly mistake!”
- Technical explanation
- Recessed in-ground lights need IP67 protection because they are temporarily submerged in water during rain or washing.
- The result
- Total safety for children and a long life for your courtyard fittings.
Guide values; the final decision rests with a qualified engineer under the applicable code.