Home / Knowledge library / Installation error
Installation error
Ignoring artwork lighting early on
Not preparing power points at the correct distance (Offset) to light paintings asymmetrically (Asymmetrical).
Related to
Similar entries
Common mistakeThe facade-lighting mistake of mounting flush to the wall
“Want your facade light to throw a stunning beam? Don't mount it flush against the wall!”
- The problem
- Mounting wall lights flush against the wall creates a harsh, very distracting Hotspot that spoils the facade.
- Technical explanation
- Moving the fitting slightly away from the wall and choosing the correct aiming angle gives a long, ideal beam that highlights the villa's height up to 16 m.
- The result
- A facade that catches the eye of the whole neighbourhood, at low cost and with smart installation.
Common mistakeOverdoing outdoor lighting (Floodlights)
“Installed stadium floodlights on your villa facade? You haven't lit it up, you've washed out its features!”
- The problem
- Flooding the facade with wide light erases the architectural details and creates light pollution.
- Technical explanation
- Highlighting a facade needs a well-planned layout of upward and downward Spotlights with narrow beams to create “contrast” between light and shadow, because shadow is what reveals the beauty.
- The result
- A palace-like facade with a far smaller electricity and installation budget.
Common mistakeFalse savings on the lighting budget
“Want to save on your lighting budget? Don't buy cheap, use the “hybrid system”!”
- The problem
- Buying cheap products for the whole villa to save money, which leads to burnt-out fittings and double the maintenance cost.
- Technical explanation
- The hybrid system means combining very high-spec fittings (for the majlis, living rooms and facade) with mid-range fittings (for service rooms and storerooms).
- The result
- Cutting costs by up to 40% while keeping 100% of the luxury in the areas guests see.
Common mistakeRandomly placed bollard lights
“Has your garden turned into an airport runway because of your path lights?”
- The problem
- Placing bollard lights too close together, randomly and excessively
- Technical explanation
- The ideal path bollard is spaced every 4 to 5 metres, and its height should ideally be half the width of the area being lit
- The result
- Elegant, calm garden paths with no extra fixture costs
Common mistakeLighting glass windows
“Have lights aimed at your living room windows? You've just blinded your guests!”
- The problem
- Aiming light at glass makes it act like a mirror, reflecting harsh light into the eyes and blocking the view of the garden.
- Technical explanation
- Light should be directed at walkways and solid walls (Wall Washer), completely avoiding reflective surfaces.
- The result
- A comfortable living room at night with a clear view of the garden.
Common mistakeChoosing the wrong wattage for façades
“Want your villa façade to stand out from afar? Don't fit it with a 5 W light!”
- The problem
- Using very weak Grazer fittings for tall façades.
- Technical explanation
- A tall façade needs a 36 W fitting (about 2300 lm) to reach the top of the building, while 5 W (300 lm) is left for soft lighting of lower walkways.
- The result
- A palace façade that catches the eye of the whole neighbourhood.
ComparisonConventional approach vs. the “hybrid approach”
“Want to save 40% of your lighting budget without losing the luxury? The secret is hybrid!”
- The problem
- Buying expensive products for the whole villa, or cheap ones for the whole villa
- Technical explanation
- The hybrid approach means using very high-spec fixtures (for the Majlis, living rooms and façade) and mid-quality fixtures (for service rooms and storerooms)
- The result
- Smart budget savings while still impressing guests in the reception areas
Common mistakeDouble-height ceilings and wasted luxury
“Got a double-height ceiling? Don't repeat the mistake that ruins the whole look of the living room!”
- The problem
- Using wide-angle (60°) spotlights in high ceilings, so the light scatters in the air and never reaches the floor.
- Technical explanation
- Ceilings 6 to 7 m high need a narrow Beam Angle of 15° or less.
- The result
- Light reaches the floor with a dramatic effect that conveys luxury and avoids wasted light.
Guide values; the final decision rests with a qualified engineer under the applicable code.